Download Oppo Reno 2f CPH1989 latest flash file version C.15 and flash your phone for removing all screen locks and fix the hang-on logo problem. always use the latest firmware for flash. Oppo Reno 2f flash tool required credential login to run, if you don’t have then contact me for flash. it’s paid service.
The Oppo Reno 2F CPH1989 Flash File will assist you to upgrade, downgrade or reinstall the stock firmware (OS) on your mobile device. The Flash file (ROM) also helps you to repair the mobile device, if it's facing any software issue, Bootloop Issue, IMEI Issue, or Dead Issue Download the Oppo Firmware for the Oppo Reno 2F CPH1989. The OS of this firmware is Android.
Oppo Reno 2F: Overview
The device has a 6.5-inches AMOLED display with 1080×2340 pixels resolution that features a Corning Gorilla Glass 5 protection. It runs on Android 9.0 Pie on top of ColorOS 6.1 UI.
It’s powered by the Helio P70 SoC, paired with 8GB RAM, 128GB onboard storage. While the handset supports up to 256GB of MicroSD card. it's a 4,000mAh battery with 20W fast charging support.
The device sports a quad rear camera setup of 48MP (wide) + an 8MP (ultrawide) + a 2MP (B/W) + a 2MP (depth sensor). While the front packs a 16MP motorized pop-up selfie camera.
it's Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2, a 3.5mm audio jack, GPS, A-GPS, GLONASS, Type-C port, FM Radio, etc. The handset also has an in-display fingerprint sensor, an accelerometer, gyroscope, proximity, an ambient light, compass sensor.
How to Flash Oppo Reno 2F CPH1989
- Make sure to download and install the drivers on your device.
- Now download the package and extract it on your computer.
- Open the SP Flash tool and - Click on the Scatter-Loading option on the right side of the tool.
- By loading the Android_scatter.txt, you will also load the firmware file.
- Tap on the Start button to start the flashing process.
- Turn off your Mobile and Connect it to the PC by pressing the Volume down or Volume up key.
- Once your flashing is done, your device will reboot.